Seeed Studio, companion radio

Seeed Wio Tracker L1 Pro

Name: Seeed Wio Tracker L1 Pro
Brand: Seeed Studio

A pocket LoRa radio with screen, GPS, battery and shell. Sold pre-flashed with Meshtastic, and also in a MeshCore companion variant.

Manufacturer specs only Not yet available Meshtastic MeshCore

Best for

A first ready-to-use mesh radio you pair with a phone.

Photo pending: we only show images we own or are licensed to use.

Strengths

Built-in 2,000 mAh battery and enclosure (Seeed wiki).
1.3-inch OLED and L76K GPS (Seeed wiki).
Seeed documents MeshCore flashing for this exact model.

Limitations

Ships with one firmware; switching requires a reflash.
Antenna connector type not stated on the wiki page we checked.
Hardware covers 862 to 930 MHz; you must set the US region yourself.

What it does not do

Message without a phone or computer in its usual companion setup.
Talk to the other network: a MeshCore radio and a Meshtastic radio do not message each other.
Replace emergency services or cellular coverage.

Specifications

From the cited source on 2026-10-26. "Not verified" means no source we checked published it.

MCU / radio	Nordic nRF52840 / Wio-SX1262^[1]
Frequency coverage	862 to 930 MHz (set US 915 region in firmware)^[1]
Display	1.3 in OLED, 128 x 64^[1]
GPS	L76K^[1]
Battery	Built-in 2,000 mAh^[1]
Included antenna	3 dBi LoRa antenna^[1]
Antenna connector	Not verified
FCC ID	Not verified

Compatibility

Check	Status	Basis
Meshtastic	Documented: documented	Pre-flashed with Meshtastic per Seeed; listed on Meshtastic supported hardware.
MeshCore	Documented: documented	Seeed documents MeshCore Web Flasher steps for the L1 Pro; a MeshCore companion variant is sold.
Frequency	862 to 930 MHz hardware; US 915 by region setting	US LoRa operation uses the 902 to 928 MHz band. Set the region in firmware.
Role	companion	Usually paired with a phone or computer app.
Power input	USB-C 5 V; solar input	Match this to your battery path before buying.

"Documented" means the maker or project publishes support for this model. It does not mean we tested it. How we rate compatibility.

MeshCore and Meshtastic are separate firmware and network systems. Check the exact hardware model, firmware, regional radio setting and local coverage before buying. These low-data-rate systems do not replace emergency services or broadband.

Operate radio equipment within your local frequency, power and equipment-authorization rules. Firmware compatibility is not regulatory approval.

Before you buy

Set the LoRa region before first use and reboot, per Seeed.

Sources

Wio Tracker L1 Introduction, Seeed Studio (manufacturer), read 2026-10-26.
Get started with other mesh firmware, Seeed Studio (manufacturer), read 2026-10-26. Documents MeshCore flashing for Wio Tracker L1 Pro via the MeshCore Web Flasher.
Seeed Wio Tracker L1 Pro for MeshCore, RobotShop (retailer), read 2026-10-26. Variant pre-flashed with MeshCore Bluetooth Companion firmware.
Meshtastic: Supported Hardware Overview, Meshtastic (project), read 2026-10-26.

Comparable options

Same kind of product. Tick two or more to compare.

Seeed Studio